Certification Introduction

Taiwan BSMI certification "Information Commodity Electrical Safety Specification Inspection Standard" CNS14336-1 (99 edition) will be implemented from January 1, 2012, while the previous version of Taiwan BSMI certification CNS 14336 (2005 edition) will no longer be applicable on the same day. Taiwan's BSMI certification CNS13438 (95 years full version) was announced on August 16, 2010, and the "Inspection Standard CNS 13438" Information Technology Equipment-Radio Frequency Interference Characteristics-Limit Values and Measurement Methods "was newly added to implement dynamic radiation tests above 1 GHz And Telecommunications Port Conduction Test Project Inspection Regulations ", and effective from October 1, 2010, BSMI is the abbreviation of" Bureau of Standards, Metrology and Inspection "in English by Taiwan Bureau of Standards and Inspection.

Taiwan voltage: single-phase 110V / 220, three-phase 220V, frequency 60Hz.

Taiwan BSMI certification basic information

Is it mandatory: mandatory

Test content: safety and EMC

Do you want factory inspection: No

Local test: yes

Local representative: Yes

Certificate validity period: 5 years (verification registration), 3 years (certification registration)

Voltage: 110Vac

Application cycle: 3-5 weeks

Authentication mode

Taiwan BSMI certification is mandatory in China and has requirements for EMC and SAFETY. However, BSMI currently does not have factory inspections, but must follow the regulations of the Bureau of Standards. Therefore, the BSMI certification model is: product inspection + registration supervision.

BSMI application method

There are two types of type approval:

1. EMC type approval (replaces the original EMC application) will be enforced from November 1, 2002. Applicable products: 61 items of electronic and electrical products only have EMI requirements, and 124 items of electronic and electrical products only require EMI + safety report (if the product has safety requirements). Applicable standards: EMI only. The documents that need to be provided are (application for electromagnetic compatibility type approval, test report, technical documents: photos, labels, parts with electromagnetic compatibility, block diagram and manual).

2. Type approval (EMC + Safety), from January 1, 2004, there are 178 kinds of electronic and electrical products need to apply for such approval. Applicable standards: EMC + Safety, the documents to be provided are (product type approval application, company or factory license, test report, technical documents for electromagnetic compatibility: photos, labels, parts with electromagnetic interference, block diagram And manuals and technical documents of safety regulations). The certificate is valid for three years and can be extended once.

BSMI certification registration

Enforcement date: not yet announced, applicable standard: EMI + safety regulations. The documents to be provided are (product type approval application, company or factory license, test report, technical documents for electromagnetic compatibility: photos, labels, parts with electromagnetic interference, block diagrams and user manuals, and safety technology Documents, declaration of conformity). Certificate validity: three years, can be extended once

BSMI certification compliance statement

Enforcement date: January 18, 2002. Applicable products: 19 kinds of information technology equipment components. Applicable standards: CNS13438 (ONLY EMC). The documents to be provided are (declaration of conformity, test report, technical documents: photos, labels, parts with electromagnetic interference, block diagrams and user manuals) There is no certificate. For electronic and electrical products, the characteristics of the three application methods provided by the Bureau of Standards are as follows:

The declaration of conformity only applies to some parts of information technology equipment (please refer to the product description on the website of the Standards Inspection Bureau)

It is up to the product cost manufacturer to apply for certification registration or type approval.

The difference between certification registration and type approval is:

Inspection method: If the product has been type approved, the inspection of the customer will be simplified. For products that apply for certification and registration, customers are not checked, and the market random sampling method is adopted.

Applicable product range

If your product falls within the following range, you need to apply for verification to expand the domestic market:

1. Compulsory Commodity Inspection Mark (CI MARK): motor products (such as home appliances), electronic products (such as information equipment and entertainment audio-visual equipment products), mechanical products (such as power tool equipment), chemical products Products (such as tires and toys).

2. Voluntary straight mark (CNS MARK): Industrial products, building materials, electric wires, home appliances, auto parts, industrial raw materials, or competitors who already have a straight mark.

3. Voluntary product verification mark (VPC MARK): important components of safety regulations, digital set-top boxes, lamp holders, battery chargers, restricted hazardous substances, lithium batteries, electromagnetic compatibility of vehicles, sports and fitness equipment, etc.

application process

1. Fill in the application

2. Test samples

3. Issue a report

4. Report evaluation

5. Issue a certificate

Application materials

1. Application

2. Copy of the applicant's certificate

3. Related technical documents (product circuit diagram, Layout, Label, Chinese manual, transformer specifications, inductance specifications, product appearance dimensions, parts list)