GB/T 28164.2-2025 "Safety Requirements for Portable Sealed Batteries and Batteries Containing Alkaline or Other Non-acidic Electrolytes Part 2: Lithium Series" will be implemented on May 1, 2026. This standard will replace the lithium battery in GB/T28164—2011 "Safety Requirements for Portable Sealed Batteries and Batteries Containing Alkaline or Other Non-acidic Electrolytes".
Compared with GB/T28164—2011, the main technical changes of the new national standard are as follows:
A) The definitions of injury, expected use, battery pack, leakage, rupture and rated capacity have been changed;
B) Terms and definitions of lithium-ion polymer battery, reference test current, charging upper limit voltage, maximum charging current, coin battery/button battery/coin battery pack, cylindrical battery, square battery, battery block/parallel connection, functional safety and discharge termination voltage/final voltage have been added;
C) The parameter measurement tolerance has been changed;
D) The general requirements, insulation and wiring, air leakage, temperature/voltage/current management, terminal contacts, battery assembly and quality plan were changed, and battery safety components were added;
E) The type test and sample quantity have been changed:
F) Changing the charging procedure for testing, expected use and reasonably foreseeable misuse, and adjusting vibration and mechanical shock to mechanical testing;
G) added design evaluation-forced internal short circuit (battery);
H) The temperature cycle and low air pressure have been deleted;
I) safety information, identification, packaging and transportation have been changed;
J) The range of charge and discharge for the safe use of lithium-ion batteries and the measurement of AC internal resistance of button batteries are increased;
K) The new standard is incorporated into IEC62133-2:2017/AMD1:2021. The main technical modifications include:
◆ In 7.1.2, "stabilize for 1h and 4h respectively" is changed to "stabilize for 1h to 4h";
◆ In 7.3.5 b), delete "at the upper charging temperature";
◆ 7.3.6 a) Delete "Charging for more than the time specified by the manufacturer shall not cause fire or explosion";
◆ Changed the battery test environment temperature in Table 5.
Warm tips
With the release of the new national standard GB/T 28164.2-2025, domestic lithium battery products will be deeply affected. ZRLK testing suggests that relevant enterprises should always pay attention to the regulatory trends, plan ahead and take the initiative to deal with them, so as to ensure that the products meet the latest national regulatory requirements and avoid unnecessary trade losses. Our company has a professional technical team and rich experience in product testing, which can help enterprises enter the target market in compliance with regulations. If you need it, please feel free to contact us, and our engineers will serve you at the first time!
